saralm88 Posted October 19, 2012 Share Posted October 19, 2012 Hi everyoneQuick question about the review of SOP by the techs on an annual basis -- is it enough to justm have them document that they read all the SOPs or must I have a place to sign off on each individual SOP?I can not find any specific standard stating this in detail, just that they need to be reviewed.Thanks!Sara Link to comment Share on other sites More sharing options...
Deny Morlino Posted October 19, 2012 Share Posted October 19, 2012 We document review of all of the SOP's for a department with one signature for the department (i.e. 1 for micro, 1 for hematology, etc.) Link to comment Share on other sites More sharing options...
David Saikin Posted October 19, 2012 Share Posted October 19, 2012 You just have to have a process which defines how you know your staff is familiar with your procedures - they do not have to be read every year (unless that is what YOUR policy demands). Link to comment Share on other sites More sharing options...
L106 Posted October 19, 2012 Share Posted October 19, 2012 Having each tech sign-off on each SOP is overkill. We have one coversheet for each manual that the techs have to sign. (However, I think David is right that it is not necessary that they need to read every procedure every year.) What is actually more important is to document that they have read and understand new or revised procedures.I make a little packet of the new/revised procedures and hightlight or explain the revisions. Then I have a coversheet and each tech has to sign that they have read and understand the new/revised procedures. (I usually have two or three packets per year.)Donna Link to comment Share on other sites More sharing options...
Eagle Eye Posted October 21, 2012 Share Posted October 21, 2012 THere is no requirement for annual review for techs. You have to have procedure to make sure your staff is aware of all your procedurs. We have page with each tech's name and different column for each volume (5-6) and tech signs off on each box (one signature for each volume).But we have very tight control where each revised procedure (regardless of the change) is kept for staff signature. If there is a big change in procedure the staff must sign off on procedure before performing thr procedure. (we also give training for procedure before implementation). Link to comment Share on other sites More sharing options...
Dr. Pepper Posted October 22, 2012 Share Posted October 22, 2012 I agree with the other posters, annual sign-off is not necessary unless that's your policy. We have an annual competency summary form for the whole lab, divided up by dept (micro, hem, BB etc) with tasks/analyzers/tests/procedure manuals listed for each area. The supervisor ticks off each area of competency, and signs off along with the tech. This is done along with the yearly performance eval for the employee. Individual signoffs are only done on new P&P or after significant revisions. (We cop the CAP line "I am familiar with the contents of this procedure relevant to the scope of my testing activities".) Of course, in addition, each department performs its wet and dry competencies. Link to comment Share on other sites More sharing options...
Liz0316 Posted October 27, 2012 Share Posted October 27, 2012 I have the annual sign off included in the checklist for annual competency. And, as part of the problem solving exercise I include a couple of questions on any new or significantly revised procedures - very specific questions, so they actually have to open the manual to find the answer. Liz Link to comment Share on other sites More sharing options...
R1R2 Posted October 27, 2012 Share Posted October 27, 2012 I have the annual sign off included in the checklist for annual competency. And, as part of the problem solving exercise I include a couple of questions on any new or significantly revised procedures - very specific questions, so they actually have to open the manual to find the answer. LizI like your idea! Link to comment Share on other sites More sharing options...
LaraT23 Posted October 29, 2012 Share Posted October 29, 2012 We have an electronic procedure system so that each procedure is documented, they open the procedure that is on their assigned list and click the mark as read tab and their name is electronically put on the has read this procedure list. We can then print a report either by procedure or by employee listing their read procedures. They do this annually. Link to comment Share on other sites More sharing options...
saralm88 Posted November 1, 2012 Author Share Posted November 1, 2012 Thanks everyone for all your feedback!! It is appreciated! Link to comment Share on other sites More sharing options...
MAGNUM Posted November 2, 2012 Share Posted November 2, 2012 We have a policy that specifically notes that all policies will be reviewed by all techs annually. That being said, we include this as part of our annual competency and evaluation, if you have not signed that you have read the policies, you are graded lower. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now