Jump to content

Baby Banker

Members - Bounced Email
  • Posts

    189
  • Joined

  • Last visited

  • Days Won

    11
  • Country

    United States

Posts posted by Baby Banker

  1. I avoid giving O Pos to male trauma patients because if we give them an anti-D and they manage to show up as a trauma patient in the future, they are at grave risk of a serious reaction.  I would note though that since I am in a pediatric institution, this is more likely to occur than in a general hospital.

     

    Thankfully, we have never been faced with having to use O pos for a female patient.  There is usually not much delay in getting a sample;  we generally go to type specific pretty quickly.

  2. On 12/13/2018 at 9:33 AM, Patty said:

    I don't have a HemaTrax for making unit numbers or barcodes to scan.  Any suggestions other than using expired supplier units and documenting that all transactions were used for testing and re-disposing of units after testing?

    I use my Validation Environment.

  3. 14 hours ago, Ehowell66 said:

    Hi folks, 

    Currently when a patient does not have a prior blood type on file,  we will collect a second specimen (drawn at different time, different person).  The forward type is repeated and resulted as the second type.  This was set up before I became supervisor.   Recently a CAP inspector told me she thought all ABO/Rh typing's  needed a forward and reverse done.   How do you do your retypes?    Based on TRM 40550 it seems the retype would need a reverse typing as well,   thoughts?       

    Thank you

     

    This is what we have always done, but I am in the process of rebuilding the verify type to include a serum type for just this reason.

  4. We are a pediatric hospital with about 330 beds.  That does not include the bascinets.  We have a very active Heme/Onc program, as well as CV and neonatology, and Level 1 trauma service.  Those are the services that use the most blood.  

    We do stem cell, heart, liver, and kidney transplants.

  5. You could do a selected cell panel.  Just make sure you cover all the antigens that are required in Canada.  Here it is DCEce Kk FyaFyb JkaJkb LeaLeb P1 and MNSs, I think.  Immucor has a 20 cell panel that has the upper ten cells are all D+, and the lower ten cells are D=.  Cells 11, 12, & 13 can be used to screen for antibodies other than anti-D.

  6. We have SafeTrace Tx, and I have used Cerner in the past.  The blood bank manager has used Mediware's HCLL, and I have seen a demo.  SafeTrace is a good system from my point of view, but the techs are not overfond of it.  There are a lot of places where the system will stop them cold.  It is usually the case that they should be stopped cold when this happens.  I will say that the canned reports are terrible.  You can write Crystal Reports and query the data base, and they have a new analytics package that is supposed to make up for the shortcomings of the reports.  We opted not to take it since we were told we would get it gratis as an established user.  This did not happen and we are looking for a new system.  We've had SafeTrace for about 15 years, so we don't take the decision to change systems lightly.  

    As far as a new system goes, HCLL is at the top of the list.  It was designed by blood bankers, and it shows.  I would urge you not to make a decision without seeing a demo from HCLL.

    BloodTrack can be used with either of the systems.

  7. Both of these are good examples.

    We do our validation in three parts:  Installation Qualification, Operational Qualification, and Production Qualification.

    The IQ just shows how it was installed.  For a piece of equipment it could be the installation checklist.  For a test it could be screen shots of whatever was changed in the computer to create the test.

    Operational Qualification shows that a piece of equipment does what the manufacturer says it will do.  What I do for a test is build it in my Validation Environment and test it there.  If that passes, I build it in the Production Environment and test it again.  I can't move a computer build from one environment to another.  So the testing method for OQ and PQ for a test is usually the same.

    However you validate, be sure to get your Medical Director to sign off on it.

  8. The Technical Manual used to have a list of antigens that must be represented in screening cells.  I haven't checked the newest edition.  I circle the required antigens at the top of a panel antigen profile, and then circle the cell number of each cell selected for the screen on the left of the profile.  Remember to take zygosity into count.  It almost always requires more than three cells.  

    I usually do this when a patient has a known antibody.  I omit that specificity, and what I am left with is a screen/short panel that will only be positive if the patient has developed a new antibody.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.