DCeDCe Posted September 9, 2015 Share Posted September 9, 2015 Hi All,I am wondering, how exactly are Warm autoadsorptions performed with PEG? I have always performed them with W.A.R.M reagent, but I have heard that using PEG is more cost effective and yields better results. Also, what exactly IS the difference in cost?? If someone could please explain this to me, it would be so incredibly helpful!! Link to comment Share on other sites More sharing options...
David Saikin Posted September 9, 2015 Share Posted September 9, 2015 (edited) There is a procedure in the technical manual I believe. Basically it is equal volumes of cells, plasma and peg. Incubate for 15 minutes, centrifuge and remove supernatant (save the cells 'cuz you can reuse them if you need to repeat the absorption), test the supernatant using 4 drops (2d peg/2d plasma). I use it for all my warm autos - it works excellently. I do this testing in tubes - I can never absorb out all the autoab if I test in gel. In another post somewhere on this site someone discussed the fact that if the absorption showed no allosensitization they just used the immediate spin xm and did not have to worry about any interference from the autoab (might have been jpcroke). Cost: I can't go there. Warm is a bit expensive. I only use it to destroy Kell system ags and use it well past its outdate (it still works and so the the controls I run). Edited September 9, 2015 by David Saikin Desoki 1 Link to comment Share on other sites More sharing options...
DCeDCe Posted September 9, 2015 Author Share Posted September 9, 2015 Thank you for your input on this method! I am wondering though, tube testing is less sensitive than gel, so are you truly clearing it when you are using this method?? Also, I don't understand why you cannot answer about the cost difference. Why? Link to comment Share on other sites More sharing options...
goodchild Posted September 10, 2015 Share Posted September 10, 2015 Well, for one: reagent costs are usually on contracts and the terms of the contracts generally include not sharing details about prices. Auntie-D 1 Link to comment Share on other sites More sharing options...
David Saikin Posted September 10, 2015 Share Posted September 10, 2015 Goodchild is correct about pricing - but WARM is more expensive than PeG. I used to have a WARM protocol for absorptions - very complicated, esp when compared to Peg. I use tubes because I can never absorb all the autoab out of a specimen if I use gel to test it with. I don't need that increased sensitivity to r/o alloabs. I have found that if I get a 4+ anti-IgG ab screen in gel, when I do it in tubes it is usually 1-2+. This usually only takes one absorption to remove. Most of the time there is no reactivity of the autoab left; rarely I have had to do 2 absorptions (and once I couldn't remove it with 4 but the tertiary care hospital couldn't either so . . .). One must also remember that tube testing is still the standard (I think). PeG absorptions sure beat the method of using enzyme pretreatment with the following incubations and absorptions. It is quick and very reliable. Hope this helps. stradfam, Dr. Pepper and Malcolm Needs 3 Link to comment Share on other sites More sharing options...
DCeDCe Posted September 12, 2015 Author Share Posted September 12, 2015 I guess I am just confused about why pricing is such a secret. I get that it depends on contract, but I am asking in order to get a general price range. I am the Lead Blood Bank Tech at my facility, and We don't currently perform warm autoadsorptions. It seems like lately, we have been getting quite an increased number of patients with a warm auto antibody. I would like to get an idea of the cost of performing adsorptions, so that I can present this info to my supervisor. Link to comment Share on other sites More sharing options...
Auntie-D Posted September 14, 2015 Share Posted September 14, 2015 I would like to get an idea of the cost of performing adsorptions, so that I can present this info to my supervisor. It's easy enough to get an idea of this from the companies themselves - they can give you more of an idea on discounts available based on order size. David Saikin 1 Link to comment Share on other sites More sharing options...
David Saikin Posted September 14, 2015 Share Posted September 14, 2015 I guess I am just confused about why pricing is such a secret. I get that it depends on contract, but I am asking in order to get a general price range. I am the Lead Blood Bank Tech at my facility, and We don't currently perform warm autoadsorptions. It seems like lately, we have been getting quite an increased number of patients with a warm auto antibody. I would like to get an idea of the cost of performing adsorptions, so that I can present this info to my supervisor. At my pricing levels WARM is more than twice the cost of PeG (10 btls each). When you reconstitute WARM it has a finite life span. I usually use only 1-2 mL of PeG for an absorption and I can still use the btl until it outdates. Link to comment Share on other sites More sharing options...
Dr. Pepper Posted September 14, 2015 Share Posted September 14, 2015 Ditto ditto ditto! Half the time, half the price, half the work. Doesn't smell like skunk juice. What's not to like? Don't worry about a loss of sensitivity - you're still testing in PeG at the end of the day. As Malcolm has pointed out, we weren't killing patients right and left in the half century before gel. Tube be or not tube be....... Sandy L, David Saikin, bldbnkr and 3 others 6 Link to comment Share on other sites More sharing options...
David Saikin Posted September 14, 2015 Share Posted September 14, 2015 . Tube be or not tube be.......I did a talk in Portland (more than) a few years ago - that was the title. bldbnkr and Dr. Pepper 2 Link to comment Share on other sites More sharing options...
Okie Posted September 16, 2015 Share Posted September 16, 2015 David, You say to save your adsorbing cells to use for a 2nd adsorption if necessary. Do you enzyme treat them initially? Do you do anything to them before putting the serum back on the 2nd time? Thank you Link to comment Share on other sites More sharing options...
David Saikin Posted September 17, 2015 Share Posted September 17, 2015 I don't enzyme pretreat. You can just pour the supernatant from the initial absorption back on then 37C for another 15 min. I've been thinking about enzyme pretreatment but I don't think so (maybe in a rare case . . . don't ask me what) Link to comment Share on other sites More sharing options...
Okie Posted September 17, 2015 Share Posted September 17, 2015 Do you typically achieve success with just 1 absorption, or do you routinely do more than 1? Also, do you add PeG? Link to comment Share on other sites More sharing options...
David Saikin Posted September 17, 2015 Share Posted September 17, 2015 Do you typically achieve success with just 1 absorption, or do you routinely do more than 1? Also, do you add PeG?Using the PeG autoabsorption - usually one does the trick BUT I am testing in tubes (see above comments) Link to comment Share on other sites More sharing options...
Mabel Adams Posted October 21, 2015 Share Posted October 21, 2015 I can't find the PEG adsorption SOP in the Technical Manual. Does anyone have an electronic version to share? Link to comment Share on other sites More sharing options...
David Saikin Posted October 21, 2015 Share Posted October 21, 2015 Mabel do you have the latest TM? It would be on the electronic file on the inside back cover. Link to comment Share on other sites More sharing options...
Dr. Pepper Posted October 22, 2015 Share Posted October 22, 2015 (edited) Mabeldo you have the latest TM? It would be on the electronic file on the inside back cover.Mabel, I'd be happy to send one if you need one. (And that credit card-sized flash drive is so cool...) Edited October 22, 2015 by Dr. Pepper Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now