Jump to content
Sign in to follow this  


Recommended Posts

Hi Everyone,

I just joined the website and I am hoping that my fellow laboratorians can help me. :) I recently finished a Joint Commission survey at my facility and I need to write (1) an IQCP for the media that we use in the Microbiology Department as well as (2) an IQCP for the Beckman Coulter MicroScan. I was hoping that someone had a template that would help point me in the right direction. Of course, aspects of the risk assessment (e.g. testing personnel, environment and so forth) will be specific to my facility but it would be great to have something to help point me in the right direction.

So if anyone could provide me a copy of their template that would be FANTASTIC!!!


I REALLY need an IQCP for the Media and one for the Microscan would be fantastic as well! :) 


Thanks in advance everyone!!

Share this post

Link to post
Share on other sites

Welcome Skye

Unfortunately you have posted your question under the Blood Bank section of this site and I'm afraid we will not be of much help with your question.

There is a Micro section on this site. If you click on Home at the top of the page and then scroll down you will see it. The lab department sections are in alphabetical order so Micro is down the list a ways.

Hope you get the answers you need.


Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Similar Content

    • By kimblain
      What are the thresholds you use for TAT on stat ABSC and Cord Blood testing
    • By SMILLER
      We have been having problems for the last month or so with D-dimer QC on our TOPS analyzers.  We are using the regular HemosiL reagents and controls, and no matter what we do, the QC runs with a Mean close to the upper insert range limit on both controls.  Does anyone else have this problem?  
      We have been using these analyzers and IL products for over a year and now this happens. We are wondering if the formulation of the QC has changed.  Once reconstituted, they are supposed to be good for a month in the fridge -- it appears to us that they may be only reliable for about a day. 
      Thanks, Scott
    • By heathervaught
      I need some guidance!  I did a quick search of the forums for any discussion about this, and the most current posting was in 2010.  I'm wondering if anyone has any new information, new experiences, or any advice about CAP TRM.40120.  The note states "...all analysts participate in QC on a regular basis."
      How frequently is "regular"?  For example, when I was looking to complete our annual Competency assessment in September (don't ask...), I was looking for evidence that each individual who performs MTS testing had performed MTS QC.  There were some employees who had not performed MTS QC yet in 2016.  I'm inclined to say that someone who hasn't performed QC in at least 8+ months is not participating in QC on a regular basis.  Being new to my role, I'm just not sure how the assessors interpret this standard, and how others provide evidence of compliance. 
    • By jeloweryii
      Hemo bioscience biotechnology
      When life depends on reliable results, you can rely on Hemo bioscience - "The science in blood banking"
    • By Lingkwyz
      Hi guys,
      I haven't been exposed as a blood banker for quite some time, so please bear with me. Recently, our institution had a case of transfusion reaction (lower back pain) with one unit of PRBCs. The testing details are as follows:
      History: Non-specific reaction (Multiple encounters)
      Pre Transfusion Sample
      Solid Phase : 2 of 3 cels 2+ (Positive
      Gel Card (Regular) : Negative
      Gel Card (Enzyme) : Negative
      Dx: Non-Specific Reaction, all siginificant antibodies excluded
      Transfusion Reaction Investigation Sample
      Solid Phase : 2 of 3 cels 2+ (suggestive with Anti-Jka)
      Gel Card (Regular) : Positive (2+) Minimum grade (Clear-cut Anti-Jka)
      Gel Card (Enzyme) : Positive (4+)  (Clear-cut Anti-Jka)
      DAT (Gel Card) : Positive
      Elution Testing: Anti-Jka Detected
      Dx: Anti-Jka
      Analyzing the encounter, me and a colleague, through curiosity re-ran the Pre Transfusion Sample:
      Pre Transfusion Sample: (Curiosity Run)
      Solid Phase : 2 of 3 cels 2+ (suggestive with Anti-Jka)
      Gel Card (Regular) : Positive ; Wp Minimum grade (suggestive with Anti-Jka)
      Gel Card (Enzyme) : Positive ; 1+ Minimum grade (suggestive with Anti-Jka)
      Taking all details, I could presume that the Gel Card  results (both regular and enzyme, which I believe was ran at the same time) of the 1st Pre Transfusion Sample was the jinx. So confidence to the testing method lies to the daily QC of the Gel Card which was ran first thing of the day. Now, I'm asking, if Solid-phase technology could incorporate a positive control and negative control to each strip of testing, why aren't there any on the Gel Card Method? Next, if the Solid-phase technology could also incorporate a "system trap" to ensure the addition of patient's sample to the testing, through it's Capture LISS, why cant the Gel Card  do so? I believe that seeing an all-negative resulted panel would be enough for some people for exclusion. Lastly, if reagents aren't available for the Gel card method to ensure the addition of plasma, should our institution enforce a backup procedure that could ensure the reviewer that none of the essential components of the testing (e.g. Patient's plasma) is not missed?
      Hoping for the masters..
      Thanks !
  • Advertisement

  • Site Suggestions

    Site Feedback & Suggestions

  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.