Lcsmrz Posted June 30, 2007 Share Posted June 30, 2007 I'm very new to Meditech 5.5 ClientServer, but I'm ready to tweak our BB setup. Specifically, I want to print a custom label on our BB label printer (with std collection labels) by checking the box on the XM Verify screen, then print a custom transfusion form on our laser printer at the time of issue. Seems like something the package can do, as long I use the correct terminology when talking to IT and set the correct parameters in the right dictionary. If someone has done this already and knows the things to do and what to watch out for, please contact me at lsmrz@mcmh.net. Thanks! Link to comment Share on other sites More sharing options...
Mabel Adams Posted July 2, 2007 Share Posted July 2, 2007 I think the label you want to be working on Meditech calls the Issue-transfuse card. It can print at xm and/or at issue. There is a separate crossmatch card which you can print although we use only the Issue-Transfuse card printed at crossmatch. Link to comment Share on other sites More sharing options...
Lcsmrz Posted July 4, 2007 Author Share Posted July 4, 2007 Mabel:Thanks for the name of it. I would have opted for the other one without knowing. Larry Link to comment Share on other sites More sharing options...
rrcc1974 Posted March 7, 2008 Share Posted March 7, 2008 Larry, We created custom crossmatch, assignment and I/T cards. The crossmatch cards print on 2x4 label stock and are stuck to cards stock and attached to the unit. The I/T card prints to an Okidata printer. The report is a 2 part with the back copy being returned to the BBK for entering of transfusion data.Davidxm.doc Link to comment Share on other sites More sharing options...
Lcsmrz Posted March 8, 2008 Author Share Posted March 8, 2008 Thanks for verification that what I am trying to accomplish can actually be done.I can only get things to print by using the "reprint" option (issue, issue/transfuse card) and that happens one unit at a time. I want to check the boxes on the Results Verification screen and get all of them when the XMs is done. The "daisy" menu options don't work either. Fragments are correct in the dictionaries.IT can only get collection labels to print on our label printer. For BBK, something hits the printer, but nothing prints, so it's probably in the report config. I'm new to Meditech, and until ISBT128 is done, I have no time to learn reports. The hospital cancelled my trip to Boston for classes.Been working on this on-and-off for months now. No one knows enough about the connection between the application software and the printer -- and Meditech is not being very helpful. Link to comment Share on other sites More sharing options...
bbbirder Posted March 10, 2008 Share Posted March 10, 2008 Larry,We use Magic, so some of this may not apply to C/S.But in Magic, we also have some things set up in the Device Dictionary. There is a column called "Usage". There you enter the Default routine (suchs as BAC... BBK ASN Cars, and BISF... BBK Issue Forms) and then the default device for printing. We also set set the default printer and form in the Default Dictionary.e-mail me if you need more about this.Linda Frederick Link to comment Share on other sites More sharing options...
rrcc1974 Posted March 10, 2008 Share Posted March 10, 2008 In C/S that would be the Client dictionary. See example.Client.txt Link to comment Share on other sites More sharing options...
rrcc1974 Posted May 5, 2008 Share Posted May 5, 2008 I am looking for an Order Rule that would prevent users from ordering an ABORH on a patient <4 months old and instead order an ABORHNB. Would anyone have this done? Link to comment Share on other sites More sharing options...
bbbirder Posted May 7, 2008 Share Posted May 7, 2008 Here is our rule to prevent ordering a Cord Blood workup if the baby is more than 14 days old. With some minor changes (reverse the greater than/less than signs, use the age in months instead of days) you should be able to get it to work. (This needs to be built in the MIS dictionary and attached to the test in OE.) IF{Z?0N [f ord err msg](X);on patient older than 14 days."^X, IF{L(Z,"Y")^J<L(Z) Z$J^Y:0S+0^Y,Z%J^Z},Y>0 [f ord err msg](X); IF{L(Z,"M")^J<L(Z) Z$J^M:0S+0^M,Z%J^Z},M>0 [f ord err msg](X); IF{L(Z,"D")^J<L(Z) Z$J^D:0S+0^D},D>14 [f ord err msg](X); [f ord ok]}; Linda Frederick Link to comment Share on other sites More sharing options...
rrcc1974 Posted May 7, 2008 Share Posted May 7, 2008 Thanks Linda, Would you be able to explain the function of Z?0N and IF{L(Z,"Y")^J<L(Z) Z$J^Y? We have the same rule set for NBIL but I cannot understand the logic. David Link to comment Share on other sites More sharing options...
bbbirder Posted May 13, 2008 Share Posted May 13, 2008 This was set up a very long time ago. At one time, I may have understood it... not sure I do any more."?" is for a pattern match and I think it allows all of the fields (Year, Month, Day) to be evaluated.As I recall writing it this way allows the order to be blocked (rather than allowing a message that can be bypassed with an override).Sorry I can't help more. Meditech logic is not very logical to me.Linda Frederick Link to comment Share on other sites More sharing options...
whbb Posted May 14, 2008 Share Posted May 14, 2008 David,We created these rules because there is an AABB survey question that asks what steps the facility has in place to assure that a patient that reaches the age of four months will be treated like an adult sample. I don't think saying that the Tech will cancel the order and place the appropriate order will suffice.I actually created three rules:1)Pediatric Packed Cells when pt reaches 4 months of age (RULE1)2)Pediatric ABO/Rh when pt reaches 4 months of age (RULE2)3)Pediatric TS when pt reaches 4 months of age (RULE3)RULE 1;If patient's age is greater than 4 months, then PCPEDI can not be ordered.;A patient whose age is greater than 4 months will be required to have a Type and Screen performed every 72 hours."PT GREATER THAN 4M OF AGE, ORDER PC"^MESG,[f pt cur age]^AGEIF{AGE#2="M" AGE$3^MT},IF{AGE?0N!(AGE#1="Y")!(MT>"03M") MESG}^X,IF{X [f lord err msg](X);[f lord ok]}^OK,IF{OK [f lord ok];[f lord reject]};RULE 2;If patient's age is greater than 4 months, then test can not be ordered.;"PT GREATER THAN 4M OF AGE, ORDER ABO/RH"^MESG,***the rest of the rule is the same as RULE 1***RULE 3;If patient's age is greater than 4 months, then test can not be ordered.;"PT GREATER THEN 4M OF AGE, ORDER TS"^MESG,***the rest of the rule is the same as RULE 1*** Link to comment Share on other sites More sharing options...
rrcc1974 Posted May 16, 2008 Share Posted May 16, 2008 Thank-you whbb, that's perfect with a little modification:D Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now