Tynuvm Posted September 10, 2014 Share Posted September 10, 2014 Hi, i am validating transport cooler at our facility to hold a total of 8 units. My question is how many units do i need inside the cooler for validation? Is one enough? Thanks. Link to comment Share on other sites More sharing options...
Cliff Posted September 10, 2014 Share Posted September 10, 2014 We validate all of our coolers empty, with two (mock) units and full to capacity.Most of our coolers leave with 2 or 4 units, but sometimes we do an exchange and issue 2 or 3 full coolers.I suggest you validate your coolers to mimic how they will be used. Link to comment Share on other sites More sharing options...
Tynuvm Posted September 10, 2014 Author Share Posted September 10, 2014 Will have to get 8 units then. Thanks. Link to comment Share on other sites More sharing options...
Alana Posted September 12, 2014 Share Posted September 12, 2014 I validate the coolers with the minimum and maximum volume the cooler can hold. In your case that would be 1 unit and 8 unit. My reason is to ensure the 1 unit doesn't freezer and the 8 units are not to warm.In the patient care area, there will be times only 1 units is left because they are using them. And you may send the cooler out with eight. The goal is to qualify the equipment at low and high ends.Alana Link to comment Share on other sites More sharing options...
Tynuvm Posted September 12, 2014 Author Share Posted September 12, 2014 Thanks Alana, that's what we ended up doing. Max. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now