NLiveris

Hello Kaleigh,
Per ICCBA, you will need to carry over the container attribute, therefore you cannot use E2121 for all of them.  You can use E2121 as the 5-day Thawed Apheresis Plasma code for E0869 and E1624 (the last two on your list). 
Below are the thawed codes you need.
E2121 = Thawed Apheresis PLASMA|ACD-A/XX/refg E5548 = Thawed Apheresis PLASMA|ACD-A/XX/refg|1st container E5549 = Thawed Apheresis PLASMA|ACD-A/XX/refg|2nd container E5550 = Thawed Apheresis PLASMA|ACD-A/XX/refg|3rd container I hope the above information helps.
Thanks,
Digi-Trax Corporation

Hi Sonya,
The DIAMOND symbol that prints on an ISBT128 Full Face label is a new added feature in the HemaTrax UNITY v9 (Integrated and Standalone). It's a scanning guide to decode all printed ISBT128 barcodes on a Full Face label in one trigger press. This feature, however, requires the use of a specific HemaTrax supported 2D barcode scanner  -- Zebra DS8100.
The feature can be easily disabled from the "HemaTrax Print Server Settings" module following the steps below (see attached picture):
- Uncheck the "Print AIM Spot in the ABO-Rh quadrant." checkbox  
- Click "Save".
- Restart the "HemaTrax Print Server" service from the Control Panel - Administrative Tools - Services.
 
I hope the above information helps but you can always contact the Digi-Trax support team if you need additional help.
Kind Regards,
Digi-Trax Technical Support

I hope this information helps in regards to DIN on collected or pooled products. Per US Consensus Standard, 
the DIN should remain that of the collection facility unless the product is pooled. 
If the product is pooled, a unique new pool number shall be assigned by the pooling facility. This product shall 
be given a new Donation Identification Number (DIN) and not use a DIN from one of the units in the pool. The new 
DIN shall have the Facility Identification Number of the pooling facility.  

And below DIN information is excerpted from the US Consensus Standard v3.0.0 - 7.8.2.2.
Some computer systems treat reconstituted red cells as a pooled product; others do not. The Donation Identification Number (DIN) 
can either be a newly assigned Pool Number (for those systems that treat the product as a pooled product) or that of the RBC 
(for those systems that do not treat it as a pooled product). The text name and location of the facility that appears beneath the 
DIN shall correspond to the Facility Identification Number within the DIN. That means, if the original DIN of the red blood cells 
is used, the name beneath the DIN shall correspond to the collection facility. If a new pool number is assigned to the product, the DIN 
shall have the Facility Identification Number of the pooling facility, and the name beneath the DIN shall be that of the 
pooling facility. Regardless of which method is chosen, traceability of both the red blood cells and the plasma shall be assured. 
The DIN of the plasma must be associated with the DIN of the final product in the facility records. 

For a product that is IRRADIATED, that attribute will print on an ISBT 128 label below the product name (see example) using HemaTrax software from Digi-Trax. No need for a separate label.

Digi-Trax offers blood compatibility labels with FDA approved adhesive that will not leach into the bag.  The adhesive is quite durable and labels will not fall off the bag.  For more information, please visit our web site at www.digi-trax.com or contact us at 847-613-2100. We’re happy to provide you with the right solution.

Digi-Trax offers blood compatibility labels with FDA approved adhesive that will not leach into the bag.  The adhesive is quite durable and labels will not fall off the bag.  For more information, please visit our web site at www.digi-trax.com or contact us at 847-613-2100. We’re happy to provide you with the right solution.

The HemaTrax  "Stand-Alone" system can generate all ISBT128 compliant labels from blank stock during down time and emergency release circumstances if you wish to have an on-demand system.