Customize a whole blood unit for an exchange using ADSOL units

[LK11]

Good morning!

We used to use only CPD units for babies but recently changed to only using Adsol units for babies (we no longer receive or use CPD units). Since then we recently had to customize a whole blood unit for an exchange but we were unable to complete in LIS (Soft) since it wasn't set up.

II am looking for the ISBT codes for

1. final product - Customize Whole Blood

2. products used - Red Cells (Adsol) and Plasma to make whole blood.

Thanks everyone!

 

 

 

 

[Sonya Martinez]

Are you looking for reconstituted RBC from AS3 or AS1 when adding FFP? Or are you switching to using actual whole blood?  Here's a list with CPDA-1, AS3 and AS1 final product codes when you reconstitute with thawed FFP, FP24 or RT<24hr Frozen <24hr.

Starting RBC Product Code	Reconstituted RBC Product Code		Starting RBC Product Code	Reconstituted RBC Product Code
E0224	E5797		E4532	E7651
E0226	E6453		E4533	E7652
E0332	E6128		E4538	E6147
E0336	E6786		E4539	E6791
E0379	E6148		E4540	E6792
E0382	E6785		E4543	E6788
E0420	E6149		E4544	E6789
E0424	E6787		E4545	E6790
E0661	E6796
E0668	E6797
E0678	E6793
E0685	E6794
E0686	E6795

[LK11]

Thanks Sonia!

Yes, you are right, I am looking for the reconstitued red cell product, please give me plasma codes also, need tp set up the database to combine plasma and red cells to make reconstitued red cells.

Thanks for quick response.

[Sonya Martinez]

Our computer system (WellSky Transfusion v. 2020R3) build utilizes the ISBT formulas to modify products.  So we only had to build in the codes going from the original RBC unit to the final reconstituted one.  It only requires the starting RBC and the ending RBC component information to make it work using a pooling process and it works with all our thawed plasma.  You may have to to validate that all your thawed plasma product codes can be used if it's a different process/computer build.  For example: Start with RBC E0224 who's component code is 002 and ISBT equation is @08C2 D4 then pool it in an open system, using process code PLS-A (add plasma) to E5797 with component code 002 and ISBT equation @08B2 C2 D4 E4.  The B2 makes it an open system and the E4 gives it the 'plasma added' on the label.  I hope this helps.

 

[LK11]

Got it! I will test it out.

Many many thanks!